|
|
 |
| Compact Discs/DVDs |
|
|
|
|
SAFETY TRAINING FOR REPAIR TECHNICIANS
Produced to help professional mechanics become aware of the day-to-day dangers of their job. Sixty-fi ve percent of injuries occurring in mechanical repair work relate to hands, eyes, and backs. This video addresses the causes and cautions necessary to avoid injuries.
• Individual responsibility for personal and overall job safety / Using the correct tool for the job • New ideas in safe lifting techniques • How to climb on and off large equipment • Staying clear of the path of unplanned energy release
|
Member Price:
$109.00
Non-Member Price:
$129.00
|
|
BACKHOE LOADER SET OF THREE
Included in set: Backhoe Loader Maintenance and Transport, Backhoe Pre-Start Inspection, Backhoe Loader Safe Operating Techniques.
|
Member Price:
$225.00
Non-Member Price:
$255.00
|
|
CRAWLER EXCAVATOR SET OF THREE
Included in set: Crawler Excavator Maintenance and Transport, Crawler Excavator Pre-Start Inspection, Crawler Excavator Safe Operating Techniques.
|
Member Price:
$195.00
Non-Member Price:
$220.00
|
|
PIPELAYER TRACTORS DAILY PRE-START INSPECTION & OPERATING TECHNIQUES
Pipeline installation, replacement and repair work is increasing. The availability of experienced pipelayer tractor operators is decreasing. This new video can help pipeline supervisors meet the training challenge. On a single, two-part video cassette. Part 1: 13:00 minutes. Maintenance and safety inspection points, What to really look for, Tips on wire rope inspection. Part 2: 20:00 minutes. Covers - stringing, bending, welding, set-in, tie-in, Mechanical & Hydraulic Winches, Hand signals, Managing difficult soil & terrain, Working close to crews.
|
Member Price:
$115.00
Non-Member Price:
$125.00
|
|
TRENCH EMERGENCY
A must-see for all supervisors and competent persons. This VHS video has an excellent overview of protecting trenches from potential hazards and explicit examples of good and bad on-site crisis management. The video highlights trench shoring, trench shields, cave-in procedures and rescue plans. A Coastal product - 16 minutes.
|
Member Price:
$350.00
Non-Member Price:
$395.00
|
|
|
Advances in Underground Pipeline Design, Construction and Management
The primary goal of this new book is to familiarize owners, utilities, engineers and contractors interested in pipeline design, construction and asset management with the recent body of knowledge and to alert them to common problems. In 400+ pages, Dr. Jeyapalan has documented, in SI and Imperial Units side-by-side, many valuable lessons he learned over 35 years of working on more than 300 pipelines in 28 countries.
|
Member Price:
$250.00
Non-Member Price:
$280.00
|
|
HDD Safety Training Program
The HDD Safety Training Program is a PowerPoint presentation created to assist in-house and consultant instructors teach construction managers, foremen, competent persons and workers how to identify common hazards unique to HDD and ways to eliminate or control them. This PowerPoint presentation also includes notes to discuss the relevant issues in detail.
Please note: This program is not recommended for use as a self-taught and/or e-learning training experience
|
Member Price:
$99.00
Non-Member Price:
$149.00
|
|
|
|
PIPELAYER CHAPTER 2: EXCAVATIONS, TRENCHING, MANHOLES AND BACKFILLING
This interactive, 60-90 minute, computer-based training CD is divided into sections--Safety, Trenching, Bedding, Backfilling, Manholes, Dewatering, and Tie-ins
Click here to view a sample from the Bedding section that includes photographs, videos, animations and quiz samples. (Note: The sample’s picture quality might have become slightly degraded by its posting to a website.)
Click here to view a detailed outline of the topics covered covered in Chapter 2.
|
Member Price:
$1,750.00
Non-Member Price:
$2,500.00
|
|
|
|
ON AGAIN OFF AGAIN: A GUIDE TO MOUNTING AND DISMOUNTING HEAVY EQUIPMENT
This video helps to reduce or prevent Workers’ Compensation claims by training people how to correctly mount and dismount equipment.
Topics include:
Walk around inspections, Reviewing the manual, Face equipment when getting on and off, 3 points of contact rule, Belt buckle rule, Keep hands free when mounting, Use designed handhold & hand rails, Never allow passenger to ride
|
Member Price:
$135.00
Non-Member Price:
$149.00
|
|
|
|
PIPELAYER CHAPTER 1: JOB LAYOUT
An interactive 60-90 minute computer based training CD divided into sections on Safety, Material Layout & Handling, Production & Timing, Tools and Protecting the Installation.
|
Member Price:
$1,600.00
Non-Member Price:
$2,300.00
|
|
|
HDD INSTALLATION GUIDELINES - CD Rom
A "must-have" for anyone involved in HDD. Developed by a consortium of organizations involved in the horizontal directional drilling (HDD) industry, this CD provides quick, searchable information on HDD applications, equipment and materials, planning, jobsite safety, risk reduction, and mitigation. A great reference tool for training field personnel to make efficient, effective, and safe installations. The Guidelines were developed with the support of NUCA and the NUCA Foundation for Education and Research.
|
Member Price:
$20.00
Non-Member Price:
$40.00
|
|
RIGGING AND LIFTING WITH SMALL HYDRAULIC CRANES DVD
This DVD explains the various types of rigs such as basket hitches or chocker hitches. Learn to understand hitch angles and their effect on sling, chain, or rope wire ratings.
|
Member Price:
$139.00
Non-Member Price:
$149.00
|
|
|
SEEING IS BELIEVING-Underground Damage Prevention DVD
A guide to safely exposing buried utilties. Methods and procedures used to reveal buried services. Physically exposing buried utilitites in a safe, efficient way is absolutely vital to any installation repair.
|
Member Price:
$99.00
Non-Member Price:
$149.00
|
|
SAFE AND EFFICIENT OPERATION OF HAND-HELD CUTOFF SAWS DVD
This DVD focuses on the safe and proper operation of gasoline powered cutoff saws. Includes: saw adjustments, safety devices, correct blade type and application, saw starting techniques and the care and cleaning of saws.
|
Member Price:
$79.00
Non-Member Price:
$89.00
|
|
WHEEL LOADER SET OF TWO DVD
Included in set: Wheel Loader Walk Around and Introduction, and Wheel Loader Operating Techniques
|
Member Price:
$225.00
Non-Member Price:
$250.00
|
|
HAND SIGNALS FOR CONSTRUCTION EQUIPMENT DVD - English
Shows the SAE hand signals in use with various types of contruction equipment
|
Member Price:
$89.00
Non-Member Price:
$99.00
|
|
HAND SIGNALS FOR CONSTRUCTION EQUIPMENT DVD - Spanish
Shows the SAE hand signals in use with various types of contruction equipment
|
Member Price:
$89.00
Non-Member Price:
$99.00
|
|
|
TRANSPORTING CONSTRUCTION EQUIPMENT DVD
To help you determine the answer to that question, the National Utility Contractors Association (NUCA) has released a new 34-minute DVD that visually illustrates the Department of Transportation’s Federal Motor Carrier Safety Administration regulation 49 CFR, Part 393 as it applies to the transport of construction equipment.
The information has been segmented by major topic to facilitate review and/or clarification:
- Introduction
- The Trailer Loading
- Equipment Securement Points
- Understanding Tie-down Equipment
- Tie-down Procedures
- On the Road
- Conclusion
|
Member Price:
$195.00
Non-Member Price:
$295.00
|
|
|
CONFINED SPACE IN CONSTRUCTION DVD
Two years in the making, NUCA’s highly anticipated new Confined Space in Construction DVD is now available for purchase. Shot on actual jobsites across the country, this 19-minute DVD can be used as a toolbox talk or as a complement to confined space training. In addition to a description of what constitutes a “confined space,” the topics covered include:
Regulations and permits, Training, Atmospheric testing, PPE (including respirators), Ventilation methods, Physical hazards, Lockout/blockout/tagout, Emergency plans and much more
|
Member Price:
$125.00
Non-Member Price:
$195.00
|
|
|
Trenchless Assessment Guide CD
A time-saving, easy-to-use interactive software designed to help utility engineers and designers evaluate the trenchless construction methods that can be employed in the installation, rehabilitation or replacement of buried utilities. In addition to the DVD, you will also receive a free copy of the Trenchless Construction and Rehabilitation Methods manual - 4th edition. Following a brief introduction to trenchless technology, individual chapters describe the characteristics, equipment requirements, procedures, advantages and disadvantages of each trenchless installation method. The chapter on pipe ramming methods has been revised and expanded, and six new chapters have been added—Pipe Bursting, Sliplining, Cured-In-Place Pipelining, Fold and Form Pipelining, Deformed/Reformed HDPE Pipelining and Vacuum Excavation. Receive a free copy of NUCA's Trenchless Construction & Rehabilitation Methods manual (4th edition) free with this purchase
|
Member Price:
$125.00
Non-Member Price:
$195.00
|
|
|
EXCAVATION SAFETY ORIENTATION DVD
This interactive, pictorial-based training DVD teaches workers how to recognize safety and health hazards when working in and around excavations and trenches and how to protect themselves and others from hazards. This program is ideal for use by employers as an introduction to excavation and trench safety for new employees and for workers reassigned to excavation and trenching operations. Produced in English and Spanish for both audio track and visual text, it presents excavation safety in a manner that permits learning comprehension by workers with limited education or reading skills.
Please note: DVD only works on a PC with a DVD drive
|
Member Price:
$59.00
Non-Member Price:
$99.00
|
|
LOCKOUT/TAGOUT OF CONSTRUCTION EQUIPMENT
Industrial and manufacturing Lockout Tagout procedures do not directly relate to repair work done on mobile construction equipment. Created to provide a simple straight-forward process designed to meet OSHA requirements as they relate to work on mobile construction equipment of all types.
• Reference to the specifi c OSHA regulations
• Training requirements
• Types of energy affected by lockout/tagout process
• Areas where hazardous energy may be stored
• The 6 steps of the lockout/tagout process
|
Member Price:
$119.00
Non-Member Price:
$129.00
|
|
Pipelayer Tractors Daily Pre-Start Inspection & Operation Techniques DVD
Pipeline installation, replacement and repair work is increasing. The availability of experienced pipelayer tractor operators is decreasing. This new video can help pipeline supervisors meet the training challenge. On a single, two-part video cassette. Part 1: 13:00 minutes. Maintenance and safety inspection points, What to really look for, Tips on wire rope inspection. Part 2: 20:00 minutes. Covers - stringing, bending, welding, set-in, tie-in, Mechanical & Hydraulic Winches, Hand signals, Managing difficult soil & terrain, Working close to crews.
|
Member Price:
$115.00
Non-Member Price:
$125.00
|
|
|
RIGGING AND LIFTING WITH MOBIL CONSTRUCTION EQUIPMENT
Pratical advice and real-world cautions on how to do on-site lifting jos safely. Video includes analyzing the load, determining proper rigging, adjusting for the center of gravity and the effects of various types of hitches.
|
Member Price:
$99.00
Non-Member Price:
$149.00
|
|
| Shopping Cart |
You have
0
items in your cart.
View Cart
|
Go to my shopping cart
|
